You can skip this in seconds

Click here to continue

Download Now!

Engenius ESR1221N Router Firmware 1.1.0

Engenius ESR1221N Router Firmware 1.1.0

Engenius ESR1221N Router Firmware Publisher's Description

Specifications:

RF Specifications
- Frequency Band 2.400–2.484 GHz
- Modulation Technology OFDM: BPSK, QPSK, 16-QAM, 64-QAM
- DBPSK, DQPSK, CCK
- Operation Channels 11 for North America, 14 for Japan, 13 for Europe
Wireless Mode 11b/11g/11n
- Channel Selection (Setting varies by Country)
- Channel Bandwidth (Auto, 20Mhz, 40Mhz)
- Transmission Rate 11g: Best. 54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, 1 in Mbps

Receive Sensitivity
- IEEE 802.11n  up to -85dBm
- IEEE 802.11g  up to -88dBm
- IEEE 802.11b  up to -90dBm

Available Transmit Power
- IEEE 802.11n  up to18dBm
- IEEE 802.11g  up to 18dBm
- IEEE 802.11b  up to 19dBm

Software Features
- Topology Infrastructure
- Operation Mode AP/Router
- LAN
- DHCP Server
- Static Routing Table
- UPNP
- WAN PPTP • PPPoE • Static IP • DHCP Client • Clone MAC address

Router
- NAT/ NAPT
- Static Routing
- Dynamic Route
- Virtual server mapping
- IP address mapping
- Port Forwarding
- Port Triggering
- Special application
- DNS Relay
- DDNS
- Time Zone(NTP client)

Firewall
- Block ICMP Ping
- DoS(Block ICMP Ping, Port scan, Sync Flood)
- MAC/IP Filtering
- ICMP Blocking
- SPI (Stateful Packet Inspection)
- DMZ (Demilitarized Zone) Host
- Policy Based Parental Controls
- Port Range / Service Filtering
- Internet Domain Restriction

VPN VPN pass-through (PPTP, L2TP, IPSEC)

Wireless
- Power saving(Green technology)
- 64/128 bit WEP Encryption
- WPA Personal (WPA-PSK using TKIP or AES)
- WPA Enterprise (WPA-EAP using TKIP)
- 802.1x Authenticator
- Hide SSID in beacons
- Wi-Fi Protection Setup (WPS)
- WDS
- ACL control
- Best Channel selection
- Speed/Bandwidth monitor

QoS
- WMM
- Application base
- Priority Queue
- Bandwidth Allocation

Please do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.

Note: Try to set a system restore point before installing a device driver. It will help you restore system if installed driver not complete.

Look for Similar Items by Category

Feedback

Popular Downloads